888.221.8660 info@revivescientific.com
Cart 0

PHCBI CO2 Incubator for Cell Culture

PHCBI CO2 Incubator for Cell Culture


This PHCBI CO2 Incubators has been fully tested, inspected and verified to be in great working condition. 

60 Day Warranty!

Both units have been tested to hold temperature and CO2 to specification



               - 1x PHCBI CO2 Incubator  (MCO-230-AICUVL-PA)

              - 2x Shelves

              - 1x Humidity Tray

              - 8.1 cu ft

              - Power Cord

              - 60 Day Warranty

- Settable Temperature Control Range of ambient +5C to +50C

- Settable CO2 range from 0% to 20%

- Temperature uniformity of +/- 0.25C. CO2 uniformity of 0.15%

- Exterior Dimensions: W30.3”x H35.6”x D28.7”

- Interior Dimensions: W25.3”x H27.6”x D20.6”

- Access Port: 1, Rear Upper Left, 1.2" 30mm

- Power Requirements of 115V/60Hz/single phase/15 amp breaker. (NEMA type 5-15R receptacle)

- Net Weight: 198.4 lbs (90kg)

- Gross Weight: 240.3lbs (109kg)

- Shipping: W34.8” x 41.5” x D31.9”

Cell Culture Incubators Capabilities
As a crucial piece of laboratory equipment, PHCbi brand cell culture incubators are designed to ensure highly accurate, reproducible chamber conditions. Our cell culture incubators provide a contamination-free environment while allowing precise CO2 or CO2/O2 control - essential for in vivo environment replication.
Uniform Consistent Environment
The patented Direct Heat and Air Jacket system, IR2 sensor, SafeCell™ UV and inCu-saFe® work together to ensure precise temperature, CO2 levels and contamination control respectively for a precise and repeatable environment.
Rapid CO2 Recovery with IR2 Sensor
Proprietary IR2 sensor provides superior CO2 control with fast recovery without overshoot even following multiple door openings.
Time Saving Decontamination
An optional high speed decontamination system uses hydrogen peroxide (H2O2) vapor to clean the incubator chamber in under three hours. The system safely and efficiently decontaminates with a 100% kill rate with at least a six log reduction of major contaminants.
Contamination Control with SafeCell UV and InCu-safe
The PHCbi inCu-saFe combines the germicidal properties of elemental copper with the corrosion and discoloration resistance of stainless steel to deliver passive contamination control throughout the chamber interior. The SafeCell UV lamp provides safe, active and passive contamination control of circulated air and the humidity water reservoir. SafeCell scrubs and decontaminates circulated chamber air without affecting cell cultures in situ.
Color LCD Display
The high contrast color LCD display allows for easy, touchscreen programming of temperature, CO2and other internal conditions of your incubator even with gloved hands.
USB Log Function for Data Transfer and Storage
A standard USB port simplifies the storage or transfer of logged data.

Product ID #2311


Share this Product

More from this category